Bullet V-TAIL is a fully 3D-printed fixed-wing drone, delivered as print-ready STL files, featuring a twin-motor configuration and a lightweight, aerodynamically optimized airframe with a V-tail layout. The V-tail design reduces drag and structural complexity while improving efficiency and stability. Its modular construction allows for quick replacement of damaged parts and effortless upgrades, making the platform highly customizable and adaptable to a wide range of missions.
If you already own the Bullet with a conventional tail, you only need to purchase the V-tail section to upgrade your existing airframe.
Length
Wingspan
All-Up Weight
Max flight time (4S 3300mAh battery)
973 mm
1800 mm
2.2 kg
~30 min
The Bullet files includes a instruction manual to guide you step-by-step through the entire assembly process, ensuring a smooth and hassle-free build.
STL files now include an FPV Nose designed for fast and easy installation of both the camera and VTX. It mounts to the fuselage using four M2.5 screws, allowing quick removal and replacement when needed.
Bullet features a modular design with screw and clip connections – no glue needed. Parts securely lock together with clips, ensuring a strong hold and easy disassembly. If damaged, only affected part needs replacement, making repairs quick and cost-effective.
Replaceable skids protect the bottom of the Bullet during rough landings. They minimize damage when landing on hard surfaces and can be easily swapped out when worn.
The motor mounts are designed for the HobbyWing Skywalker 2320 but can be customized for other motors. Feel free to request a different mount during or after purchase at no extra cost.
Bullet’s design is optimized for easy printing on most FDM 3D printers with a minimum build volume of 220x220x250 mm.
| Component | Example/Quantity |
|---|---|
Brushless motors |
2x Hobbywing Skywalker 2320 860 KV |
ESCs |
2x Hobbywing Skywalker 40A V2 |
Servos |
4x EMAX ES08MA II |
Propellers |
APC 10×5.5MR and APC 10×5.5MRP |
Battery |
Gens Ace LiPo Soaring 3300mAh 4S |
LW-PLA |
1 Roll ColorFabb 750g
(2 recommended in case of failed prints) |
PLA |
JAYO PLA+ |
Carbon Fiber Tubes 5x4x1000mm |
2 |
Carbon Fiber Tubes 6x5x1000mm |
1 |
Carbon Fiber Tubes 8x7x1000mm |
2 |
Carbon Fiber Tubes 10x9x1000mm |
2 |
Carbon Fiber Tube 12x10x1000mm |
1 |
Steel Pushrod 1x1000mm |
1 |
M2 Threaded Inserts |
4 |
M3 Threaded Inserts |
33 |
Linkage Stoppers |
4 |
M2x16 Screws |
4 |
M3x5 Screws |
26 |
M3x8 Screws |
7 |
Velcro Strap |
1 |
| Tools |
|---|
3D Printer :) |
Soldering Iron |
Rotary Tool |
Flush Cutters |
Scalpel |
Sand Paper |
Hex Keys |
CA Glue |
CA Activator |
© 2025 Astrofly Technologies. All rights reserved.
